LockNLube® Grease Coupler XL
SKU: GC81042-BSPT
🚚 This item includes FREE shipping
- Completely hands-free and leak-free lock
- Easily disconnects, even under pressure
- Works on all Zerk fittings, SAE and metric
- Locks on, stays on, won't leak. Rated up to 10,000 PSI
- Over 89mm (3.5") of reach. Great for shielded PTO shafts, axles, harvester heads, U Joints and other recessed grease fittings.
- Easily disconnects, even under pressure. No more broken grease nipples!
- Options in 1/8" NPT and 1/8" BSPT to fit most standard Grease Guns
- Fits all Zerk, DIN, SAE and Metric grease nipple fittings. Replaces your existing coupler.
- The LockNLube® is the world's only rebuildable grease coupler. Lowest lifetime cost. Rebuild kits sold separately.
- Patented Locking Technology. US Patent #8955544
LockNLube® Grease Coupler XL
Uses & Compatibility
The LockNLube® Grease Coupler XL, just like the shorter original, is compatible with all grease guns and grease fittings. It does not leak once locked on and will not pop off under pressure. No hands are needed to align or hold the coupler in place while greasing. You have both hands free to operate your grease gun and know that the grease will go in, not on, your machine. Guaranteed.
The XL is suited for all machines, but especially useful for U-Joints, Harvester Heads, shielded PTO shafts, and any fittings buried deep behind a shield. With almost 4" of reach, you can be confident that you'll reach your fittings and grease will go in, not on, your machine. When you want to release the coupler, simply depress the thumb lever, even at extreme pressures. Watch our YouTube video demonstrating the LockNLube® Grease Coupler.
Product Features
It has a unique sliding sleeve, activated by a thumb lever. The sleeve locks the four spring-steel jaws onto the Zerk fitting, and releases the jaws by pushing on the thumb lever. When the jaws are locked onto the Zerk, a leak-proof seal is created. The locked connection is positive and rigid preventing the coupler from coming loose and breaking the leak-proof seal. If a fitting becomes pressurized, especially a recessed one, just depress the thumb lever and release the coupler.
Replaceable Seal & Jaws
The LockNLube® Grease Coupler XL is fully rebuildable. If it starts to leak, you simply replace the seal and jaws and it is as good as new. See our tutorial here. The rebuild kits for the LockNLube® Grease Coupler and the LockNLube® Grease Coupler XL are identical and can be used in either model.
LockNLube® Grease Coupler Care & Maintenance:
Check out our YouTube channel for an easy method to clean dirt and grit out of your coupler. This will extend the life of the seal, which means longer use time between rebuilds. If you find your coupler starting to leak, try this cost-saving tip before you put a rebuild kit in it.
Consider using a Coupler Cap and Zerk Fitting Caps to keep your equipment clean.
Demonstration of LockNLube XL features and releasing from a clogged fitting at 8,000 PSI
The LockNLube® Grease Coupler XL features almost 4″ of reach, 2″ more than the standard LockNLube® Grease Coupler. Especially suited for deeply recessed fittings, and with the same leak-free, hands-free convenience of the traditional model.